|
|
Evaluation of electrochemical characteristics of AZ61 wrought magnesium alloy
Kotek, Jakub ; Minda, Jozef (referee) ; Fintová, Stanislava (advisor)
This work is focused on evaluation the electrochemical characteristics of AZ61 wrought magnesium alloy. Electrochemical impedance spectroscopy and potentiodynamic tests were used to evaluate the electrochemical characteristic of the alloy. Values of polarization resistance were determined with electrochemical impedance spectroscopy. Values of corrosion potential and corrosion current density were determined with potentiodynamic tests. Sodium chloride solution at a concentration of 0.1 mol·dm-3 was used as a corrosion medium. Outcome of this work is to estimate an influence of fabrication, chemical composition and surface treatment on the corrosion properties of magnesium alloy.
|
|
|
Electrochemical Characterization of Nanostructured Surfaces Modified by Substancies with Thiol Bound
Urbánková, Kateřina ; Kynclová, Hana (referee) ; Hrdý, Radim (advisor)
This master thesis deals with nanotechnology, nanoparticles and nanostructured surfaces, electrochemical methods, especially voltammetry, cyclic voltammetry, electrochemical impedance spectroscopy and contact angle measurement. One part is focused on electrodes primarily nanostructured and modified by substancies with thiol bound. Tutorial for preparation of gold nanostructured electrods is introduced in practical section including SEM photos of electrode surface. Nanostructured and bare gold electrodes were modified by 11-mercaptoundecanoic acid, streptavidin, glycine and biotin and measured by cyclic voltammetry, electrochemical impedance spectroscopy and contact angle.
|
|
|
Analysis of liquid electrolyte electrical parameters using impedance spectroscopy
Brabenec, Josef ; Pikula, Stanislav (referee) ; Havránek, Zdeněk (advisor)
The bachelor thesis deals with impedance spectroscopy of electrochemical systems, especially liquid electrolytes. The method of impedance spectroscopy is widely used to describe electrochemical cells, batteries and electrolytes for diagnostic purposes over a wide range of frequencies. This thesis presents the main types of impedance imaging in the complex and frequency domain, as well as basic information on the measurement methods used and the methods for impedance analysis. The main part of the thesis was the development of software for automated impedance measurements and estimation of equivalent circuit parameters using basic and specialized circuit elements. A workplace with fabricated electrodes for liquid electrolyte measurements was prepared for the application. The functionality of the application was verified by real measurements of different concentrations of water and salt solutions. The validity of the estimated equivalent circuit parameters was verified on measured simple circuits connected from basic circuit elements and was also verified using the commercially used ZView software.
|
|
|
Electrochemical corrosion characteristics of Mg-Zn systems prepared by powder metallurgy
Kotek, Jakub ; Hadzima, Branislav (referee) ; Fintová, Stanislava (advisor)
The diploma thesis deals with evaluation of electrochemical corrosion characteristics of Mg-Zn systems prepared by powder metallurgy in SBF solution. The main aim of the thesis is to analyze the influence of chemical composition, achieved structure and parameters of the process of production of Mg-Zn systems on their electrochemical corrosion characteristics. The basic electrochemical properties of the prepared materials will be evaluated by electrochemical impedance spectroscopy. In order to clarify the mechanism of corrosion of materials, the immersion tests will be used, accompanied by metallographic observations.
|
|
|
Impedance measurements of lead-acid accumulators
Vaculík, Sebastian ; Bača, Petr (referee) ; Abraham, Pavel (advisor)
The main aim of this paper is to contribute to the elucidation of electrochemical processes. These processes occur in the investigated experimental lead-acid cell. For this purpose, electrochemical impedance spectroscopy was used. There are two methods of measurement presented. First one is used to measure impedance between electrodes. Second one is used to measure impedance of collector ribs inside positive or negative electrode. The results are represented by electrical equivalent circuits, whose elements are described in detail in the theoretical part.
|
|
|
Calandering of li-ion electrodes and its impact on the final capacity of lithium-ion cell
Svoboda, Lukáš ; Kazda, Tomáš (referee) ; Čech, Ondřej (advisor)
There is an effort to produce lithium-ion batteries with maximal density of energy, or higher capacity of cell with the same size. Calendaring of electrodes is important part of manufacturing of batteries. Its parameters, mainly the pressure of calendaring and with it related the final compression ratio of electrode layers, affect parameters of battery significantly. It is the process of pressing electrode material coated on current collector with certain pressure and it reduces its porosity and thickness. The aim of this bachelor thesis is determination of suitable level of calendaring that increases specific capacity, but does not reduce its cyclability.
|
|
|
Electrochemical impedance spectroscopy as a nanostructured bioelectrodes characterization method
Vrbová, Eva ; Urbánková, Kateřina (referee) ; Hrdý, Radim (advisor)
Diploma thesis deals of nanostructured surfaces, nanoparticles and electrochemical characterization methods such as cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. The aim of this thesis is a theoretical research issues of production and characterization nanostructured modified electrodes. The practical part is the production of biomodified nanostructured electrodes by anodi- zation W/Al layers with galvanic deposition of gold or deposition of mercury, a modifi- cation of the electrodes by 11-mercaptoundecanoic acid and by bovine serum albumin (BSA). The thesis includes SEM images of nanostructured electrodes contact angle mea- surements of these electrodes and form an electrical circuit with subsequent simulation waveforms.
|
|
|
Evaluation of electrochemical characteristics of AZ61 magnesium alloy processed by squeeze casting
Pikner, Jan ; Hadzima, Branislav (referee) ; Fintová, Stanislava (advisor)
Bachelor thesis deals with the characterization of electrochemical corrosion properties of AZ61 magnesium alloy prepared by squeeze casting method. The theoretical part of the work focuses on properties of AZ61 alloy, influence of alloying elements on magnesium alloys and corrosion. The practical part of the work deals with electrochemical characteristics of AZ61 alloy with different surface condition in of 0.1 M NaCl solution. Corrosion potential (Ekor) and corrosion current density (ikor) were determined by potentiodynamic test. Polarisation resistance was determined by electrochemical impedance spectroscopy. Based on the measured results was discussed the influence of production, chemical composition, structure and surface treatment (grinding and polishing) on corrosion characteristics of the alloy.
|
|
|
Spray-coated working electrodes of electrochemical sensors
Lechner, Filip ; Majzlíková, Petra (referee) ; Prášek, Jan (advisor)
This thesis is about the selection of the better type of thick film working electrode for the detection of substances in aqueous solutions, modified by spray coated carbon nanotubes. The theoretical part of this thesis describes the technology of thick film, properties and production of carbon nanotubes, introduction to electrochemistry and electroanalytical methods for the detection of substances in aqueous solutions. The practical part is aimed to realization of the working electrodes by thick film technology and their modification by spray-coated layer consist of carbon nanotubes. Electrodes are characterized using voltammetric methods, electrochemical impedance spectroscopy and electron microscopy. In conclusions is selected the most suitable type of working electrodes for reproducible electrochemical analysis.
|
|
|
Nanopatterned alumina-based materials for electrochemical sensors and biosensors
Kynclová, Hana ; Hynek, David (referee) ; Trnková, Libuše (referee) ; Prášek, Jan (advisor)
The doctoral thesis is focused on basic research and development of nanostructured surfaces prepared using anodic alumina material. Various types of gold nanostructured surfaces and nanoporous aluminum membranes for electrochemical sensors and biosensors were prepared using the anodic oxidation method. Nanostructured surfaces were prepared by electrochemical anodization of aluminum material to form hexagonally arranged nanopores. Gold was then deposited into the nanoporous masks by electrochemical reduction from potassium dicyanoaurate solution using a pulse deposition method. The prepared nanostructured gold surfaces were electrochemically characterized by electrochemical impedance spectroscopy and voltammetry. Temperature stability and the effect of annealing on their electrochemical behavior at atmospheric pressure as well as in the vacuum were investigated. Then, gold nanostructures of various dimensions were prepared and the influence of their shape and dimensions on the electrochemical behavior was studied. Nanostructured surfaces were also modified with 11–mercaptoundecanoic acid, and the effect of this modification on the electrochemical results was studied. In the last part of the work, nanoporous aluminum membranes were prepared, and their permeability was studied.
|
guest ::
